|
| ||
| Views: 1,041,830 | Main | Rules/FAQ | Memberlist | Active users | Last posts | Calendar | Stats | Online users | Search | 11-13-19 08:45 AM |
| Guest: | ||
| 0 users reading Touch Screen? | 1 bot |
| Main - Reverse-engineering - Touch Screen? | New reply |
| gudenau |
| ||
|
Member Normal user Level: 12 
Posts: 28/34 EXP: 7851 Next: 70 Since: 07-28-15 From: /dev/random Last post: 1275 days ago Last view: 1221 days ago |
Anyone have info on how the 3DS gets its input from the touch screen? |
| profi200 |
| ||
|
Member Who knows? Level: 17 Posts: 62/70 EXP: 23693 Next: 1050 Since: 05-21-15 From: Germany Last post: 1157 days ago Last view: 1025 days ago |
*cough* libnds *cough* |
| gudenau |
| ||
|
Member Normal user Level: 12
Posts: 29/34 EXP: 7851 Next: 70 Since: 07-28-15 From: /dev/random Last post: 1275 days ago Last view: 1221 days ago |
Posted by profi200 Is the hardware really the same though? I know it changed from DS to DSi and I don't want to use compatibility modes. |
| nocash |
| ||
|
Normal user Level: 18 Posts: 32/77 EXP: 26134 Next: 3763 Since: 10-09-15 Last post: 262 days ago Last view: 178 days ago |
libnds should contain code for both DS and DSi modes (that code will require "low level" access to SPI bus).
don't know if 3DS comes up with a different mode, just try the DSi code. If it works, then DSi and 3DS are apparently accessing it the same way. calibration data could be read in DS fashion (from wifi flash), but there should be also a 3DS specific config file containing the same calibration values (probably also stored somewhere in RAM). |
| profi200 |
| ||
|
Member Who knows? Level: 17 Posts: 63/70 EXP: 23693 Next: 1050 Since: 05-21-15 From: Germany Last post: 1157 days ago Last view: 1025 days ago |
xerpi is reverse engineering sysmodules right now to find out how to do it. Unfortunately the DSi touchscreen read code in libnds does not correctly work. I thought because it is backwards compatible that could work but it is different in 3DS mode. |
| xerpi |
| ||
|
Newcomer Normal user Level: 5 Posts: 3/4 EXP: 342 Next: 187 Since: 11-11-14 Last post: 1322 days ago Last view: 1321 days ago |
Here's all the RE I've done to the GPIO module: http://pastie.org/private/b17vatmthopnxufqb5trw
I'm still trying to figure out how the GPIO registers work. |
| Dazzozo |
| ||
|
Member Dev of "the best software that almost nobody will ever use" Level: 8 
Posts: 13/13 EXP: 1896 Next: 290 Since: 05-21-15 Last post: 1325 days ago Last view: 1158 days ago |
see http://3dbrew.org/w/index.php?title=Codec_Services&curid=2071&diff=16241&oldid=13745
These use SPI device 3, I think the legacy (TWL) device was 2. |
| gudenau |
| ||
|
Member Normal user Level: 12
Posts: 30/34 EXP: 7851 Next: 70 Since: 07-28-15 From: /dev/random Last post: 1275 days ago Last view: 1221 days ago |
Oh, so mr Linux was working on it. Cool.
Guess I'll just do other things... |
| xerpi |
| ||
|
Newcomer Normal user Level: 5 Posts: 4/4 EXP: 342 Next: 187 Since: 11-11-14 Last post: 1322 days ago Last view: 1321 days ago |
Yesterday I finally got the touchscreen working on Linux after porting the RE'd code from the codec and SPI services. I'll post the pseudo-code to get the touchscreen initialized and read from it soon. |
| gudenau |
| ||
|
Member Normal user Level: 12
Posts: 31/34 EXP: 7851 Next: 70 Since: 07-28-15 From: /dev/random Last post: 1275 days ago Last view: 1221 days ago |
Posted by xerpi Nice, got ARM9 <-> ARM11 yet? |
| Main - Reverse-engineering - Touch Screen? | New reply |
|
Page rendered in 0.020 seconds. (2048KB of memory used) MySQL - queries: 28, rows: 83/83, time: 0.015 seconds. ![[powered by Acmlm]](img/poweredbyacmlm.png "powering nostalgia")
Acmlmboard 2.064 (2018-07-20)© 2005-2008 Acmlm, Xkeeper, blackhole89 et al. |